Static Ip Changer Program Directv

You need to open ports (3334 to 3337) on your router for your Direct TV. Provide a static/manual IP Address to your Direct TV(ip address: 192.168.1.2, subnet mask: Helicon Remote Apk Serial Podcast. 255.255.255.0, default gateway: 192.168.1.1). Open an Internet Explorer browser page on your computer.In the address bar type - 192.168.1.1 Leave the username blank & in password use admin in lower case. Click on 'Applications and Gaming' tab and then click on 'Port Range Forwarding' subtab. 1) On the first line in Application box type in ABC, in the start box type in 3334 and End box type in 3337, leave the protocol as both and under ip address type in 192.168.1.2 and check the enable box, click Save Settings, now see if you can connect to Direct TV. Carrot: Thanks for th einfo, here is what I did and the results: IP = 192.168.1.110 Subnet = 255.255.255.0 Gateway = 192.168.1.1 DNS = 192.168.1.1 Added port forwading (ports 3334 - 3337) Protocol = Both To IP Address = 192.168.1.110 Enabled Saved At the Direct TV Receiver: Menu Setup System Network Advanced Connect Network = detected Internet = no connection (22) Tried calling Direct TV; they blew me off Tried 'chatting' with Linksys.pretty much useless Cable from receiver to Linksys WRT300N is good (test on laptop) all else looks good.I am so frustrated.